![background image](http://html1.mh-extra.com/html/omron/nv3q-mr21/nv3q-mr21_operation-handbook_742776007.webp)
NV-series PT Simple Operation Handbook
Advanced UsageAdvanced Usage
Ct
i
it
h
Connecti
n
g w
ith
CPIE PLC
Designing Screens
Preparation
7
Displaying the NV System Menu
The System Menu is the special screen that is used to configure the NV.
Some settings such as touch switch adjustment can only be done on the
System Menu.
Accessing the System Menu
Follow the steps below to access the System Menu.
1. Touch the touch panel on the PT as shown below.
(This is common for the entire NV Series.)
1) Touch the upper left corner (A) for at least 2
seconds.
2) Then immediately touch the upper right
corner (B) and lower right corner (C) in order.
Note: Touch the points A, B, and C, one at a time in order. Do not press these points at the
same time.
2. The startup screen of the System Menu will be displayed.
The startup screen of the System Menu will be
displayed.
The next screen will be displayed if you touch
the
Setting Menu
or
Test Menu
Key.
To return to normal operating status, touch the
ESC
Key.
Note: The system version is the version of the system ROM in the PT.
The default language for the System Menu is English, if there is no screen data in the PT.
The System Menu depends on the PT model. The default System Menu for the NV3W-V1
is used here.
Changing the System Menu language
The language is switchable between English and Japanese on the NV System Menu.
Select
Setting Menu
-
Language
.
Touch A for at least 2 seconds, then press B and C in order.
Preparation
Summary of Contents for NV3Q-MR21
Page 36: ...2015 0715 0110 V411 E1 02...