OMRON
NS Series Quick Start Manual
Page 42
•
The Data Link Table settings can be made in the CX-Server Routing Table
Component (in the CX-NET).
Settings must be saved in the *.cl3 or *.clk file and then link it to the NS project
via NS Designer's [Data Link Table Setting] tab (in the System Settings window).
To operate with CLK, please read more detailed instructions from NS-Series
Operation and Setup manuals!
•
As mentioned in section 2-5, by using a memory card the screen data can be
transferred faster than with Ethernet. Before using Memory Card functions,
please read more specific instructions from NS-Series Setup Manual (V083-E1-
xx), section 3-6.
•
For e.g. the first time downloading, you can make yourself the RS232C-
connection cable between the computer and the PT. Below are the wiring
instructions for the cable:
Computer
RS-232C D9-pin
male connector
pin number:
RS-232C
D9-pin
female connector
pin number:
PT
CD 1
1 FG
RXD 2
2 TXD
TXD 3
3 RXD
DTR 4
4 RTS
SG 5
5 CTS
DSR 6
6
5-V output
(250 mA max.)
RTS 7
7
CTS 8
8 DTR
RI 9
9 SG
Frame ground
Shield
Shield
Frame ground