OMRON
NS Series Quick Start Manual
Page 39
8. When transferring data to and from the Memory Card, a message indicating that
downloading/uploading is completed will be displayed when data has finished
transferring.
When data is transferred using serial communications or Ethernet, the
Transmitting screen will be displayed at the PT while data is transferring,
displaying information about the transfer process.
9. The following screen will be displayed on the PT when transferring has finished.
The PT Restart Confirmation Dialog Box will be displayed at the transfer tool. Click
the Yes Button to restart the PT.
Click the No Button to return to the Screen Data Transfer Dialog Box and continue
transferring screens.
Even if the No Button was pressed, the PT Restart Confirmation Dialog Box will be
displayed again when the Screen Data Transfer Dialog Box is exited. The PT will be
restarted if the Yes Button is pressed, but if the No Button is pressed, the PT will
have to be restarted directly from the PT. Press the Cancel Button to return to the
Screen Data Transfer window.
4.1.3
After transferring data
When the PT starts up, the PT goes into RUN mode and starts operating according to
the screen data in the PT. So RUN mode is entered automatically if screen data
already exists.