16
Fiber Laser Marker MX-Z2000H-V1 series User’s Manual (Z416)
No.
Name
Function
1
Shutter
This shutter is located inside the head. Closing this shutter can block the emission of the laser beam.
2
Laser warning indicator
The laser warning indicator light indicates the following statuses.
3
Key switch
The laser power ON/OFF can be controlled with the key switch. While a laser system is not in use, the safety
manager must keep the system key in order to keep the laser from being operated without permission.
4
Interlock connector
This connector is used to construct a mechanism that forcibly turns OFF the laser and stops the laser emission. Use
this connector to utilize a device into which the laser marker is incorporated as the interlock system to comply with
International Standards ISO13849-1 (JIS B 9705-1).
5
I/O emergency stop input
Set the [EMERGENCY A] (emergency stop input A) or [EMERGENCY B] (emergency stop input B) terminal to open
(OPEN) to forcibly close the shutter inside the marker head and stop the laser emission.
6
Marking stop input
Input a signal to [STOP] to stop the processing laser emission and operate in the guide laser mode.
7
Shutter control input
Open the [SHUTTER A] (shutter control input A) or [SHUTTER B] (shutter control input B) terminal to close the
shutter.
8
Emergency stop switch
If you want to immediately stop the marking, press this switch to turn OFF the laser power.
9
Laser beam exit
This is the laser irradiation port.
10
JIS/EN laser warning label
JIS/EN laser warning label (Japanese/English) (page 17)
EN laser warning label
(German/French)
EN laser warning label (German/French) (page 17)
11
Electric shock warning label
Electric shock warning label (page 18)
12
Igniting or explosion warning label
Igniting or explosion warning label (page 18)
13
Name plate
Name plate (page 19)
14
Standard label
Standard label (page 19)
15
Caution label for fall hazards
Caution label for fall hazards (page 19)
Color
Status
Meaning
Unlit
Laser power OFF
The laser power is OFF.
Green
Laser power ON
The laser power is ON and laser can be irradiated (laser standby
mode).
Red
Processing laser irradiating
Processing laser is being irradiated (marking is in progress).
Green/red Guide laser irradiating
Guide laser is being irradiated.