4
Fiber Laser Marker MX-Z2000H-V1 series User’s Manual (Z416)
z
Warning display
z
Caution for falling
Indicates a possibility of falling due to strongly pushing and pulling certain parts of the device.
A serious personal injury may result.
Do not operate the product unless you have received laser safety training or operation training, or have understood
the content of this manual.
Set up the laser controlled area and enclose the laser irradiation area with a shield so that the laser emission does
not exceed the class 1 (IEC 60825-1, JIS C6802) level.
A serious personal injury may result.
Voltage is applied to some parts inside the product. Do not touch the inside of the product.
A serious personal injury may result.
When you must touch the electrical system of the product for maintenance or cleaning, disconnect the controller
power supply cable of the main unit from the outlet and wait for at least 10 minutes, and then make sure, using a
tester, that there is no residual voltage.
A serious personal injury may result in some extreme circumstances.
Do not have your hand or any other body part come close to the laser emission port.
Furthermore, never open the head cover because the extremely strong, near-infrared laser beam, which is invisible
to the eye, is being emitted inside the marker head.
A serious personal injury may result in some circumstances.
Construct an interlock system with which the laser stops when the laser safety gate is opened.
A serious personal injury may result in some extreme circumstances.
Do not disassemble the product or modify the inside parts for purposes other than the specified maintenance.
A serious personal injury may result in some extreme circumstances.
Always turn off the power supply before wiring, installing, or performing maintenance on the product.
Be sure to observe the instructions for connections in the manual.
A serious personal injury may result in some extreme circumstances.
Install the product in a location that is as bright as possible. Since the diameter of pupil is larger in a dark place,
laser beam may cause an even more serious injury if it were to hit the eye.
A serious personal injury may result in some extreme circumstances.
Do not place a highly reflective object with a smooth surface near the laser beam path.
A serious personal injury may result in some extreme circumstances.
Do not place a flammable or combustible object around the product or near the laser beam path.
Smoke generating or igniting accident may result.
A serious personal injury may result in some extreme circumstances.
Never forcibly continue to operate the product when an error or failure occurs as doing so may result in smoke
generating or igniting accident.
Danger
Warning
