10
Fiber Laser Marker MX-Z2000H-V1 series User’s Manual (Z416)
1. CE marking
We have confirmed that this product satisfies the requirements of EU directive on the basis of the following requirements.
Keep the following requirements in mind when you use this product in EU countries.
EMC Directive (2014/30/EU)
Warning: This is a class A product. In a residential areas it may cause radio interference, in which case the user may be required to
take adequate measures to reduce interference.
Electromagnetic interference (EMI)
EN55011: 2009+A1: 2010 Group 1, Class A
EN55032: 2012 Class A "Electromagnetic compatibility of multimedia equipment. Emission requirements"
EN61000-3-2: 2014 Class A, EN61000-3-3: 2013
Electromagnetic susceptibility (EMS)
EN61000-6-2: 2005
• When RS-232C or RS-422A serial port is used, use a shielded twisted pair cable (AWG24) equivalent to UL2464U-TKVVBS
(Tachii Electric Wire). MX-9160-1M, 3M, and 5M (option) cables are available for RS-232C to connect this product with the PLC.
• Use a shielded cable 5m or less for connecting to the Ethernet port.
• Use a shielded cable (AWG12 to 26) for connecting to the removable terminals (for input and output) and I/O connector.
• We do not guarantee that this product works with any monitor, mouse, or keyboard. Check the compatibility before selecting a
device.
Precautions for Safe Use
These requirements do not guarantee that all machinery and equipment with this product
incorporated satisfy the requirements of EMC directive. Manufacturers of the machinery and
equipment are responsible for verifying the compatibility of the product with all the machinery
and equipment.
Low Voltage Directive (2014/35/EU)
EN61010-1: 2010 "Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General
requirements"
EN60825-1: 2014 "Safety of laser products - Part 1: Equipment classification and requirements"
• Install in a place with an altitude of 3000 m or less.
• Install indoors.
• The laser marker is a class 4 product. It is your responsibility to build your own safety system when using the product.
" For Safe Use of Laser Products (page 1-12)"
Machinery Directive (2006/42/EC)
When incorporating this product into a device that complies with IEC60204-1:2005 Standard | Safety of machinery - Electrical
equipment of machines - Part 1: General requirements, the exterior of the product may need to be changed. Please purchase the
"Masking set" (MX-9190) that helps you easily change the exterior of your laser marker.
2.UL standards
We have confirmed and received certification that this product satisfies the requirements of the UL standard on the basis of UL
61010-1.
Applicable Standards
EMC Standards
Safety Standards
