7
Adjustable tip
Carrier
Trigger
Barrel
Cap
Ejector
c. Twist the protective cap of lancet
d. Remove the cap if lancing
device and adjust the puncture
depth
a. Remove the cap by twisting it
b. Install the lancet
Chapter 3 Finger Blood Glucose Testing
3.1 Preparation before glucose testing
Please prepare materials you need as listed below and read this
manual to ensure the correct measuring process and results.
□ Blood Glucose Meter.
□ Blood Glucose Test Strip.
□ Lancing Device.
□ Lancet
3.2 Fingertip blood measurement
A. Install the Lancet
Check if lancet is new before installing it to the lancet holder and
ensure it is fully seated. Then remove the protective cap.
Adjust the puncture depth by selection dial (normally at 2nd level), twist
to suitable number (smaller number for a shallower puncture and a
larger number for a deeper puncture depth).
Structure:
OMRON blood glucose monitoring system HEA-232.indd 7
2012/6/13 下午 06:44:23