Adjusting the Object Position
32
FQ Short Manual
Adjusting the Image Timing
The internal timing for taking an image can be set to be delayed in relation to the external trigger signal. This
can be used to adjust the object position in the image, e.g., if an external trigger sensor is used. If the object
position still varies in the image the Position Compensation function must also be used.
[Image]
−
[Trigger setup]
−
[Trigger delay]
1
A TRIG signal is input.
Images are input continuously.
2
Select the image with the measurement object in the
center using [
] and [
].
3
Press the image.
4
Press [OK].
The delay time can be set using the adjustment bar or by directly entering a value.
Trigger input Sensor
Delay from when the trigger is input until
when Sensor input is started.
Delay time
Note
Directly input the delay time.
Or
Move the bar to the left or right.