manualshive.com logo in svg

Omron fh series, Operation Manual

Share
Download
Omron fh series Operation Manual Download Page 60

2   Basic Operations

2 - 32

Vision System FH Series Operation Manual for Sysmac Studio (Z343)

Right-clicking a target processing unit in the flow list displays the following menu.

Select the menu item for the operation you wish to perform.

Menu buttons

2-6-2

Managing Processing Units

Item

Description

Edit

*1

*1. If the processing item is not supported in the edit operation, the following message appears.

"The ProcItem has not been supported."

Opens the processing unit editing screen.

Rename

Changes the name of the processing unit.

New folder

Inserts a folder unit.

Copy

Copies the selected processing unit.

Paste

Pastes the copied processing unit.

Delete

Clears the selected processing unit.

Save to file

Saves the setting data of processing units to the specified file.
When on-line, saves the selected Scene group as a file to the RAMDisk or the external 
memory, i.e. USB memory. When off-line, saves it to the described following folder on 
the computer.
C:\Documents and Settings\<User name>\My Documents\OMRON FH

Load from file

Loads the setting data of processing units from the specified file.
When on-line, loads a Scene data file in the RAMDisk or the external memory, i.e. USB 
memory from the selected Scene group. When off-line, loads the Scene data file in the 
described following folder on the computer.
C:\Documents and Settings\<User name>\My Documents\OMRON FH

Button

Description

Copies the processing unit with the focus on it.

Pastes the copied processing unit.

Deletes the processing unit with the focus on it.

Summary of Contents for fh series







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands