Omron fh series Operation Manual Download Page 41

Page: 41 / 166

2 - 13

2 Basic Operations

Vision System FH Series Operation Manual for Sysmac Studio (Z343)

4 Descrip

tion

of
Screen Co

mp
on
ent
s

2-4-5 Edit Pane

This allows you to access the sensor information, the connection with the sensor, the main screen of
each line, etc.

Additional Information

• For details on the settings in the sensor connection screen, refer to

3-2 Establishing an

Online Connection with a Vision Sensor

on page 3-4.

• If there is already a different FH slave device in the project with an established online con-

nection, you will not be able to establish an online connection for a new FH slave device.
First, switch the other FH slave device from online to offline.

Sensor connection screen

Group

Item

Description

Sensor
information

Sensor name

Allows you to change the sensor name.

Comment

Allows you to enter a comment for the sensor.

Type

Displays the sensor type information.

Version

Displays the sensor version information.

Available applica-
tion memory

Displays the amount of available application memory.

Online

IP address

Sets the IP address of the sensor for online connections.

Connect

Establishes an online connection to the sensor with the specified IP address.

Disconnect

Disconnects the sensor currently connected with an online connection.

Search for sensors

Searches for sensors within the same network.

Sensor Restart

Restarts the sensor.

Initialize

Initializes the sensor.

Summary of Contents for fh series







































































































































































Search results

Summary of Contents for fh series

Reviews:

Brands by name

Popular brands

Omron fh series, Operation Manual

Search results

Summary of Contents for fh series

Reviews:

Brands by name

Popular brands