manualshive.com logo in svg

Omron fh series, Operation Manual

Share
Download
Omron fh series Operation Manual Download Page 46

2   Basic Operations

2 - 18

Vision System FH Series Operation Manual for Sysmac Studio (Z343)

This allows you to copy, switch, and clear scene data and scene group data.

It also allows you to perform test measurement and check the measurement results.

z

Status display area

This is the same as in the monitor window. Refer to 

Status display area

 on page 2-14

.

z

Image display area

This is the same as in the monitor window. Refer to 

Image display area

 on page 2-15.

z

File selection section

Scene maintenance window

Button

Description

Displays camera images. Selection is not possible when offline.

Displays logging images. Selection is not possible when offline.

Displays file images.
When online, displays images in the RAMDisk or external memory, i.e. USB mem-
ory.
When off-line, displays images in the following folder on the computer.
C:\Documents and Settings\<User name>\My Documents\OMRON FH

Launch the File Explorer and select an image file.

Summary of Contents for fh series







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands