manualshive.com logo in svg

Omron fh series, Operation Manual

Share
Download
Omron fh series Operation Manual Download Page 156

  Appendices

A - 2

Vision System FH Series Operation Manual for Sysmac Studio (Z343)

A-1 Sysmac Device Features

The control device product designed according to standardized communications and user interface 
specifications for OMRON control devices are called a Sysmac Device.

And the features available with such a Device is called Sysmac Device Features.

Because, in Sysmac Devices, errors that may occur in slaves are systematized, you can check the 
causes and remedies for errors with a common procedure.

The status of an error can be monitored in the Sysmac Error Status (2002-01 hex). To display the error 
status detected by the FH series Vision Sensor in Sysmac Studio, the Sysmac Error Status (2002-01 
hex) must be mapped to the PDO. Sysmac Studio, by default, uses the 512th transmit PDO Mapping 
assignment to map the Sysmac Error Status (2002-01 hex) automatically to the PDO.

Additional Information

• For the Sysmac Error status (2002-01 hex), refer to 

Vision System FH/FZ5 Series User's 

Manual for Communications Settings

 (Cat. No. Z342).

• For errors displayed in Sysmac Studio, refer to

 NJ/NX-series Troubleshooting Manual 

(Cat. 

No. W503).

A-1-1

Sysmac Error Status

Summary of Contents for fh series







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands