Omron fh series Operation Manual Download Page 19

Page: 19 / 166

Manual Revision History

Vision System FH Series Operation Manual for Sysmac Studio (Z343)

Manual Revision History

The manual revision symbol is appended to the manual number on the front cover and back cover.

Revision Symbol

Revision Date

Reason for Revision and Revised Page

June 2013

First edition

September 2013

Added offline debugging function, Support for software version 5.1
of the FH sensor controller.

January 2014

Added additional supported processing units, added support for
multiple FH unit settings, added a security function, expanded data
transfer functions.

July 2014

Additions for software version upgrade. Support for software ver-
sion 5.20 of the FH sensor controller.

October 2015

Additions for software version upgrade and FH Sensor Controller
ver.5.50.

April 2016

Corrections sentences related other manuals.

Z343-E1-06

Revision Symbol

Summary of Contents for fh series







































































































































































Search results

Summary of Contents for fh series

Reviews:

Brands by name

Popular brands

Omron fh series, Operation Manual

Search results

Summary of Contents for fh series

Reviews:

Brands by name

Popular brands