Omron fh series, Operation Manual

Page: 148 / 166

9 Limitations
9 - 4
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
Precautions for Correct Use
The below application will run while the FH vision sensor is being edited offline.
FZ-CoreRA 0.exe
Do not attempt to exit this application manually. Exiting this application prematurely may cause
problems to arise with the FH editing. Should the application be closed accidentally, end Sys-
mac Studio, restart the computer, and try again.
Elapsed Time ż ż
Parallelize ż ż
Parallelize Task ż ż
Conditional Branch ż ż
DI Branch ż ż
End ż ż
Selective Branch ż ż
Control Flow Normal ż ż
Control Flow PLC Link ż ż
Control Flow Parallel ż ż
Control Flow Fieldbus ż ż
Parallel Judgment Output ż ż
Data Output ż ż
Parallel Data Output ż ż
Fieldbus Data Output ż ż
Result Display ż ż
Display Image File ż ż
Display Last NG Image ż ż
Conveyor Panorama Display
ż
*3
ż
*3
*1. Sysmac Studio ver.1.09 or later is required to register and edit the processing item(s).
*2. FH Sensor Controller ver.5.20 or later is required to register and edit the processing item(s).
*3. FH Sensor Controller ver.5.50 or later is required to register and edit the processing item(s).
ż : Supported, x: Not supported
Processing Unit Registration Editing