B-i
Introduction
Thank you for purchasing the F3SN-B Series Safety Light Curtain (hereinafter referred to as "the
F3SN-B").
This is the Instruction Manual describing the use of the F3SN-B.
Always heed the following points when using the F3SN-B:
•
Read this manual thoroughly and be sure you understand the information provided before
attempting to operate the F3SN-B.
•
It is assumed that the F3SN-B will be used properly according to the installation environment,
performance and function of the machine. Qualified personnel should conduct risk assessment on
the machine and determine the suitability of this product before installation.
•
Make sure that the personnel operating the F3SN-B are knowledgeable about its’ operation and the
machine on which it is installed.
•
Keep the manual in a secure and convenient location and refer to it as necessary.
Regulations and Standards
1. Application of sensor alone can not receive type approval provided by Article 44-2 of the Labour Safety and
Health Law of Japan. It is necessary to apply with system. Therefore, when using the F3SN-B in Japan as
a safety system for pressing or shearing machines provided by article 42 of that law, the system must
receive type approval.
2. (1) The F3SN-B is electro-sensitive protective equipment (ESPE) in accordance with European Union (EU)
Machinery Directive Annex IV, B, Safety Components, Item 1.
(2) The F3SN-B complies with the following regulations and standards:
1. EU regulations
−
Machinery Directive:
Directive 98/37/EC
−
EMC Directive:
Directive 89/336/EEC
2. European standard: EN61496-1 (TYPE 2 ESPE), prEN61496-2(TYPE 2 AOPD)
3. International standard: IEC61496-1 (TYPE 2 ESPE), IEC61496-2 (TYPE 2 AOPD)
4. North American standard: UL61496-1 (TYPE 2 ESPE), UL61496-2 (TYPE 2 AOPD) ,UL1998, UL508
CAN/CSA 22.2 No. 14, CAN/CSA 22.2 No. 0.8
5. JIS standard: JIS B 9704-1 (TYPE 2 ESPE), JIS B 9704-2 (TYPE 2 AOPD)
(3) The F3SN-B received the following approvals from the EU accredited body DEMKO A/S:
−
EC Type-Examination in accordance with the EU Machinery Directive
TYPE 2 ESPE (EN61496-1), TYPE 2 AOPD (prEN61496-2)
−
Certificate of a Competent Body for EMC
−
DEMKO Type Approval TYPE 2 ESPE (EN61496-1), TYPE 2 AOPD (prEN61496-2)
(4) The F3SN-B received the following approvals from the Third Party Assessment Body UL:
−
Certificate of UL listing for US and Canadian safety standards
Both of which are: TYPE 2 ESPE (UL61496-1), TYPE 2 AOPD (UL61496-2)
(5) The F3SN-B received the following approvals from the BG test and certification body BG-PRÜFZERT:
−
BG Test and Certification Mark License
TYPE 2 ESPE (EN61496-1), TYPE 2 AOPD (prEN61496-2)
3. The F3SN-B is designed according to the following standards. To make sure that the final system complies
with the following standards and regulations, you are asked to design and use it as provided by any other
related standards, laws, and regulations.
Consult UL or other standardization bodies if you have any questions.
−
European standard EN415-4
−
Occupational safety and health standards OSHA 29 CFR 1910.212
−
American national standard ANSI/RIA 15.06
Summary of Contents for F3SN-B P Series
