Omron F3SJ-A P Series User Manual Download

Page: 95 / 136

F3SJ-A

User’s Manual

Ch
apt
e

Moun

ting

Wiring/Installation

For backside mounting, attach the intermediate mounting
bracket (1) to a wall or pillar.

Using the included mounting screws (M3x10), lightly fasten the
intermediate mounting brackets (2) and (3) so that they are able to slide
on the casing.

10.

Using the included mounting screws (M4x25), lightly fasten the
intermediate mounting bracket so that the F3SJ can slide right
and left.

11.

Tightly fasten the intermediate mounting brackets (2) and (3)
through the opening in the intermediate mounting bracket (4).

12.

After performing the adjustment described in Step 5, tightly
fasten the intermediate mounting bracket (4).

AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles

Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]

Summary of Contents for F3SJ-A P Series









































































































































Search results

Summary of Contents for F3SJ-A P Series

Reviews:

Related manuals for F3SJ-A P Series

Brands by name

Popular brands

Omron F3SJ-A P Series, User Manual

Search results

Summary of Contents for F3SJ-A P Series

Reviews:

Related manuals for F3SJ-A P Series

Brands by name

Popular brands