6
Chapter
1
Ap
plic
ation
Ex
amples
F3SJ-A
User’s Manual
Overview and Specifications
Using multiple sets in combination
By installing sensors on both sides of a machine as well as in front, you can move workpieces in and
out more efficiently than when a physical barrier is installed. If the sensors are aligned in a U-shape,
series-connection cables can be used between sets (up to 4 sets), so that only one control device is
used, drastically reducing the amount of wiring in the panel.
Muting Function:
For a system in which a workpiece crosses detection zone
Enter of a workpiece can be detected by a sensor and
the detection zone
can be temporarily disabled
only while the workpiece is crossing the area. This function is called muting.
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : [email protected]
