9
F3SG-SR-K
Quick Installation Manual
3.
Fit the groove of the sensor's cap to the bracket (2), mount the bracket (1), and tighten the alignment
screws until the sensor no longer drops (Fig. 3).
4.
Power the emitter and receiver on to perform beam alignment.
•
There is no restriction in the angle adjustment range.
Groove of the
sensor's cap
Bracket (2)
Bracket (2)
Groove of the
sensor's cap
Alignment
screws
Fig. 3
Temporarily
tighten
Alignment
screws
Temporarily
tighten
Fig. 4
Check
position
Step1
Mount
Step2
Mounting
Wiring
Operation check
