![background image](http://html1.mh-extra.com/html/omron/e3c-ld11/e3c-ld11_manual_740997026.webp)
14
E3NC
Safety Precautions
To ensure safe operation, be sure to read and follow the Instruction Manual provided with the Sensor.
Indication and Meaning for Safe Use
Sensor Heads
Various safety standards regarding laser devices are stipulated in
Japan and abroad. When this Sensor Head is used in Japan and
when it is assembled in Japan but exported to a foreign country, the
safety standards are classified into three cases.
1. When Using the Sensor Head in Japan
JIS C6802 stipulates the safety measures that must be observed by
the user for each type of laser equipment.
E3NC-LH
@@
Sensor Heads: Class 1
E3NC-SH
@@
Sensor Heads: Class 1
E3NC-SH
@@
H Sensor Heads: Class 2
• The following laser warning label and laser description labels are
attached to the sides of the Sensor Heads.
E3NC-LH03
E3NC-LH01
/E3NC-LH02
E3NC-SH
@@
E3NC-SH
@@
H
2. Using in the USA
When using devices in which the Sensor Head is installed in the
USA, the devices are subject to FDA (Food and Drug
Administration) laser regulations of the USA.
E3NC-LH03:
These Sensor Heads are classified as Class 1 laser devices under
IEC/EN 60825-1 and the regulations of Laser Notice No. 50 for this
certification. CDRH (Center for Devices and Radiological Health)
registration has been completed. (Accession Number: 1320739)
E3NC-LH01, E3NC-LH02:
These Sensor Heads are classified as Class 1 laser devices under
IEC/EN 60825-1 and the regulations of Laser Notice No. 50 for this
certification. CDRH (Center for Devices and Radiological Health)
registration has been completed. (Accession Number: 1220690)
E3NC-SH
@@
, E3NC-SH
@@
H:
These Sensor Heads are classified as Class 1 or Class 2 laser
devices under IEC/EN 60825-1 and the regulations of Laser Notice
No. 50 for this certification. CDRH (Center for Devices and
Radiological Health) registration has been completed. (Accession
Number: 1220691)
• For countries other than Japan
Replace the warning label with the corresponding
English label (supplied with SH
@@
H).
3. Using in Europe
E3NC-LH
@@
, E3NC-SH
@@
:
These Sensor Heads are classified in Class 1 under EN 60825-1.
E3NC-SH
@@
H:
These Sensor Heads are classified in Class 2 under EN 60825-1.
Indicates a potentially hazardous situation which, if not avoided, will result
in minor or moderate injury, or may result in serious injury or death.
Additionally there may be significant property damage.
Precautions
for Safe Use
Supplementary comments on what to do or avoid doing, to use the product
safely.
Precautions
for Correct Use
Supplementary comments on what to do or avoid doing, to prevent failure
to operate, malfunction or undesirable effect on product performance.
WARNING
Laser Safety
WARNING
Do not expose your eyes to the laser beam either
directly or indirectly (i.e., after reflection from a mirror
or shiny surface). The laser beam has a high power
density and exposure may result in loss of sight.
Attention
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Do not disassemble the Sensor Head. Doing so may
cause the laser beam to leak, resulting in a risk of
visual impairment.
Certification La
b
el
Class1
LASER
PRODUCT
Description La
b
el
Certification La
b
el
Class1
LASER
PRODUCT
Description La
b
el
Certification La
b
el
Class1
LASER
PRODUCT
Description La
b
el
Laser
W
arning La
b
el
Certification La
b
el