![background image](http://html1.mh-extra.com/html/omron/e3c-ld11/e3c-ld11_manual_740997015.webp)
E3NC
3
Amplifier Units: E3NC-S Ultra-compact CMOS Laser Sensor Series
(Dimensions
➜
page 19)
* A Sensor Communications Unit is required if you want to use the Amplifier Unit on a network.
Note:
Only an E3NC-SH
@@
or E3NC-SH
@@
H Sensor Head can be connected.
Accessories (Sold Separately)
Sensor Head Accessories
Reflectors (Required for Retro-reflective Sensors)
(Dimensions
➜
page 21)
A Reflector is not provided with the Sensor Head. It must be
ordered separately.
Note:
Refer to the
Safety Precautions
on page 14 for how to attach the reflector.
Lens Attachments for Sensor Heads
(Dimensions
➜
page 21)
A Lens Attachment is not provided with the Sensor Head. It must
be ordered separately as required.
Note:
You can combine the Lens Attachment with an applicable
Sensor Head to create a line beam.
Sensor Head Mounting Brackets
(Dimensions
➜
page 22)
A Mounting Bracket is not provided with the Sensor Head. It must be ordered separately as required.
Connecting method
Appearance
Inputs/outputs
Model
NPN output
PNP output
Pre-wired (2 m)
2 o 1 input
E3NC-SA21 2M
E3NC-SA51 2M
Wire-saving Connector
1 1 input
E3NC-SA7
E3NC-SA9
M8 Connector
1 1 input
E3NC-SA24
E3NC-SA54
Connector for Sensor
Communications Unit
*
---
E3NC-SA0
Applicable Sensor Head
Appearance
Model
Quantity
E3NC-LH03
E39-R21
1
E39-R22
E39-RS10
E39-RS11
Applicable
Sensor Head
Appearance
Model
Quantity
E3NC-LH03
E39-P51
1
E3NC-LH02
E39-P52
Applicable Sensor Head
Appearance
Model
Quantity
Contents
E3NC-LH03
E39-L190
1
Mounting Bracket: 1
Nut plate: 1
Phillips screws (M3×18): 2
E3NC-LH02
E39-L185
E3NC-LH01
E39-L186
E3NC-SH250H
E3NC-SH250
E3NC-SH100
E39-L187
E39-L188