3.
Reading data from CV/CVM1
Use the CX-Programmer, and read the ladder programs, PLC settings and Data Memory from the CV/CVM1.
Required items
Support software
(PC)
CX-One (CXONE-AL[][]C-V[], CXONE-AL[][]D-V[])
Or,
CX-Programmer (WS02-CXPC[]-V[])
Connecting
cable CV500-CIF01
+
Conversion connector: D-SUB25 pin (female)-9 pins (female)
+
CS1W-CIF31
CV/CVM1
PC
CX-Programmer
Connecting cable,
CV500-CIF01
D-SUB 25 pins - 9 pins
conversion,
CS1W-CIF31
Peripheral port
(1) Mount the peripheral interface (CV500-CIF01) to the CV/CVM1 CPU unit, and connect it with the personal
computer.
(2) Start up the CX-Programmer. (From the Windows Start menu, select
All Programs - OMRON - CX-One -
CX-Programmer - CX-Programmer.
)
(3) Select CV500, CV1000, CV2000, CVM1 or CVM1-V2 for the Device Type. (Select
File – New
to show the
below dialog box.) (The following example selects CVM1-CPU21-V2.)
(4) Connect the PLC and the CX-Programmer online. (Select
PLC - Work Online
)
6
Summary of Contents for CV/CVM1
Page 1: ...Replacement Guide CV CVM1 From CV CVM1 to CS1 ...
Page 10: ...MEMO ...
Page 32: ...P076 E1 01 2011 0911 ...