30
2-1
Specifications
2-1-1 General Specifications of CPU Units
Item
CPU Units with
20 I/O points
CPU Units with
30 I/O points
CPU Units with
40 I/O points
CPU Units with
60 I/O points
Supply voltage
AC power
100 to 240 VAC, 50/60 Hz
pp y
g
DC power
24 VDC
Operating
l
AC power
85 to 264 VAC
p
g
voltage range
DC power
20.4 to 26.4 VDC
Power
i
AC power
60 VA max.
consumption
DC power
20 W max.
Inrush current
AC power
60 A max.
DC power
30 A max.
External power
l
Supply voltage
24 VDC
p
supply
(AC power
supplies only)
Output
capacity
300 mA: Use for input devices only. Cannot be used to drive outputs.
(When the external power supply provides an overcurrent or is short circuited, the
external power supply voltage will drop and PC operation will stop.)
(If 3 CPM1A-MAD11 Units are connected to the CPM2A-60CDR-A, then only a
maximum of 200 mA can be used from the external power supply.)
Insulation resistance
20 M
Ω
min. (at 500 VDC) between the external AC terminals and protective earth
terminals
Dielectric strength
2,300 VAC 50/60 Hz for 1 min between the external AC and protective earth
terminals, leakage current: 10 mA max.
Noise immunity
Conforms to IEC6100-4-4; 2 kV (power lines)
Vibration resistance
10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
2
in X, Y, and Z
directions for 80 minutes each
(Time coefficient; 8 minutes
×
coefficient factor 10 = total time 80 minutes)
Shock resistance
147 m/s
2
three times each in X, Y, and Z directions
Ambient temperature
Operating: 0
°
to 55
°
C
Storage: –20
°
to 75
°
C
Humidity
10% to 90% (with no condensation)
Atmosphere
Must be free from corrosive gas
Terminal screw size
M3
Power interrupt time
AC power supply: 10 ms min.
DC power supply: 2 ms min.
(A power interruption occurs if power falls below 85% of the rated voltage for longer
than the power interrupt time.)
CPU Unit
i h
AC power
650 g max.
700 g max.
800 g max.
1,000 g max.
weight
DC power
550 g max.
600 g max.
700 g max.
900 g max.
Expansion I/O Unit weight
Units with 20 I/O points:
300 g max.
Units with 8 output points:
250 g max.
Units with 8 input points:
200 g max.
Expansion Unit weight
Analog I/O Units (MAD01):
150 g max.
Analog I/O Units (MAD11):
250 g max.
Temperature Sensor Units:
250 g max.
CompoBus/S I/O Link Units: 200 g max.
DeviceNet I/O Link Units:
200 g max.
Specifications
Section 2-1
