manualshive.com logo in svg

Omron CPM2A - 11-2005, Manual

Share
Download
Omron CPM2A - 11-2005 Manual Download Page 185

171

Revision History

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.

Cat. No. W352-E1-07

Revision code

The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.

Revision code

Date

Revised content

1

April 1999

Original production

2

September 1999

Information relating to 20-point CPU Units added throughout the manual.
Information relating to the CPM1-EMU01-V1 Expansion Memory Unit added throughout the
manual.

3

December 1999

Information relating to Temperature Sensor Units added throughout the manual.

4

July 2000

Changes were made on the following pages.

Page xiv:

 Information on Memory Cassettes removed.

Page xv:

 Information on battery terminals changed.

Pages 4, 162:

 Minor changes to layout.

Pages 11, 80, 82:

 Information on automatic mode change added.

Pages 31, 32, 37, 122:

 Minor changes to graphics, style, etc.

05

November 2002

Changes were made on the following pages.

Pages xi and 84 to 91:

 SYSMAC CPU Support Software and related informa-

tion removed.

Pages 2, 3, 7 to 10, 20, 22, 28, 30, 42, 47, 75, 160, and 166:

 DeviceNet I/O

Link Unit and related information added.

Pages 2, 3, 7, 39, 47, 160, and 165:

 Analog I/O Unit information revised to

add new model.

Pages 2, 3, and 30:

 Temperature Sensor Unit information revised to add new

models.

Pages 19, 76, and 77:

 CX-Programmer and related information added.

Page 28:

 Information added to description of external power supply.

Page 34:

 Circuit configuration diagram callouts corrected.

Page 61:

 Information added on sensor surge current.

Page 80:

 Automatic mode change information moved from page 82.

Pages 101 and 103:

 Memory clear and UM allocation information operations

added.

Page 146:

 Battery model number added.

Pages 165 and 166:

 Callouts for number of mounting holes corrected.

06

June 2003

Changes were made on the following pages.

Page xiii: 

Safety precaution regarding grounding added.

Page xviii:

 Information regarding conditions for conformance to NK standards

added.

Page 30: 

Inrush current for DC power changed from “20 A” to “30 A” in table.

Page 39:

 Information on applicable connector added.

Page 84: 

Note on connecting an NT-AL001 to the RS-232C port changed.

Page 141:

 Note on backup time after a battery error added.

07

November 2005

Page v:

 Information on general precautions notation added.

Page xi:

 Information on liability and warranty added.

Pages xvi and xvii:

 EN50081-2 changed to EN61000-6-4.

Summary of Contents for CPM2A - 11-2005




























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands