8
BP100XSG/BP150XSG Instruction Manual
1
2
Fasten the connector to the
2 supports of the plate cover
and fix it.
You may hear a “pop” sound when you connect the battery if it is replaced
after the unit’s operation is stopped, but this sound is not abnormal.
If the connector is not fixed to the plate cover, the connector is not completely
inserted. Insert the connector again.
1
2
1
3
Tighten
the 2 screws.
5. Insert new batteries in both upper and bottom parts as far as it will go and store them.
1
l
Replacement battery pack
For BU3002SWG: Model BP150XSG (2 required)
Pass the upper part of the bottom battery connector through the square hole of the plate
cover.
2
Insert the hook on the bottom side of the plate cover into the hole of the main body, and
push the plate cover toward the main body.
Use a screwdriver to securely tighten (clockwise) the 2 screws you removed.
3
Do not pinch the cable with the plate cover.
6. Insert the upper and bottom connectors until they are locked.
1
Fix the connector to the plate cover.
2