3
BP100XSG/BP150XSG Instruction Manual
2. Remove the battery connector from the plate cover.
1
Hold the connector and pull it out.
2
90%
50%
30%
-
バッテリ
交換
バッテリ
増設
ブザー停止/テスト
電源出力
バイパス
運転
1
90%
50%
30%
-
バッテリ
交換
バッテリ
増設
ブザー停止/テスト
電源出力
バイパス
運転
Loosen the 2 screws
2
Hold here
to disconnect
90%
50%
30%
-
バッテリ
交換
バッテリ
増設
ブザー停止/テスト
電源出力
バイパス
運転
1
Battery connector
Plate cover
1. Checking the contents
Check whether all the package contents are included and there is no damage found on their ap-
pearance. If you should notice defects or anything wrong, contact the shop of purchase.
l
Compliance Information Sheet ......................1
l
Battery pack fixing screw (spare) ...................2
2. Replacing the battery
2-1. Procedure for replacing the battery of UPS
1. Use a screwdriver to loosen (turn counter-clockwise) the 2 screws at the top of the front
panel of the unit, until they turn freely. (The screws cannot be removed from the front
panel.) Pull the top of the front panel open and remove it.
1
BU1002SWG