background image

 

BP100XSG/BP150XSG Instruction Manual

Pb

 Caution

 (for battery replacement)

If fluid (dilute sulfuric acid) leaks from the battery, do not touch the fluid.

 

l

Doing so may cause blindness or burns.

 

l

If it contacts your eyes or skin, wash it out with lots of clean water and consult your 

doctor.

Do not disassemble or modify the battery.

 

l

Doing so could cause dilute sulfuric acid leak, which could cause blindness and burns.

Do not drop the battery and do not expose it to strong impact.

 

l

Dilute sulfuric acid may leak.

Do not short the battery with metal objects.

 

l

Doing so could cause an electric shock, fire or burn.

 

l

Some electrical energy still remains inside the spent battery.

Do not put the battery into fire and do not break it.

 

l

The battery may explode or leak dilute sulfuric acid.

Do not use a new battery and an old battery at the same time.

 

l

Dilute sulfuric acid may leak.

When replacing batteries, do not put hands in the battery compartment.

 

l

Doing so may cause an electric shock or a short circuit.

 

l

Do not insert metal objects.

Do not insert metal objects into the battery connectors.

 

l

 Doing so may result in electric shock.

Keep plastic package bags and films out of reach of children.

 

l

Children may suffocate if they place their heads into plastic bags and films.

u

NOTE

u

Battery recycling

 

l

The unit uses lead acid batteries, which are a valuable recyclable resource.  

Please recycle.

Storage possible period of the battery (in unused state) is about 6 months from the full 

charge state. (Storage temperature is 25°C or less, or every 2 months when the storage 

temperature is 40°C or less.

 

l

The battery self-discharges even when it not being used, and it goes into over-discharge 

state if it is left for a long period. The backup time may become shorter or the battery may 

become unusable.

 

l

Degradation progresses while the battery is being stored, and it shorten the life of the 

battery. Start using it as soon as possible.

 

l

Start using the battery within 6 months after purchase.

 

l

When storing the battery installed on the UPS, recharge the battery for at least 8 hours 

before storing and turn OFF the unit’s power switch when storing it.

 

l

If the storage period exceeds 6 months, connect the UPS to a commercial outlet for at least 

8 hours and recharge it before the storage period exceeds 6 months.

 

l

If storage is to be continued, recharge every 6 months when the storage temperature is 

25°C or less and every 2 months when it is below 40°C.

Summary of Contents for BP100XSG











Reviews: