5
BP100XSG/BP150XSG Instruction Manual
Tighten the 2 screws.
90%
50%
30%
-
バッテリ
交換
バッテリ
増設
ブザー停止/テスト
電源出力
バイパス
運転
1
90%
50%
30%
-
バッテリ
交換
バッテリ
増設
ブザー停止/テスト
電源出力
バイパス
運転
2
3
90%
50%
30%
-
バッテリ
交換
バッテリ
増設
ブザー停止/テスト
電源出力
バイパス
運転
2
Fasten the connector
to the 3 supports of
the plate cover and
fix it.
1
You may hear a “pop” sound when you connect the battery if it is replaced
after the unit’s operation is stopped, but this sound is not abnormal.
5. Insert a new battery into the UPS as far as it will go and store it.
1
l
Replacement battery pack
For BU1002SWG: Model BP100XSG
Attach the plate cover.
Insert the hook on the bottom side of the plate cover into the hole of the main body
2
,
and push the plate cover toward the main body.
3
Use a screwdriver to securely tighten (clockwise) the 2 screws you removed.
Do not pinch the cable with the plate cover.
6. Insert the connector until it is locked.
1
Fix the connector to the plate cover.
2
If the connector is not fixed to the plate cover, the connector is not completely
inserted. Insert the connector again.
