5 Processing for the automatic shutdown of the connected devices
5-1 Overview of the automatic shutdown software functions
BL50T/BL75T/BL100T
59
5
5 Processing for the automatic
shutdown of the connected devices
5-1 Overview of the automatic shutdown
software functions
When an input power supply abnormality (power failure, etc.) occurs, UPS monitoring
software can be used for shutting down connected computers.
Important notice
Restrictions on the commercial power supply stop time for a schedule action by
automatic shutdown software
●
With a schedule action set, if the UPS is not connected to commercial power for a
long time, the internal timer will be reset.
To retain the internal timer setting, connect the UPS to commercial power within
approx. 3 months*.
※
Due to battery deterioration over time, the period for which the internal timer
setting can be retained becomes shorter.
When manually starting during the scheduled operation using the UPS monitoring
software
●
When manually starting the UPS stopped by a schedule action, turn off the "Power"
switch once, and turn it on again. To manually stop the unit during the scheduled
operation, turn OFF the power switch.
Under the setting of auto stop the UPS after OS closing processing, when the power is
restored while auto shutdown processing is being performed
●
Even if a power outage occurs and power is restored during the execution of
automatic shutdown processing, the output of the UPS stops once after the set time
elapses. After shutdown is finished, do not turn on the computer until the UPS has
finished restarting.
