2 Installation and connection
2-2 How to connect the device to back up
BL50T/BL75T/BL100T
25
2
2.
Connect the disconnected "AC input" plugs into "power output" outlets of the UPS.
※
If more power output outlets are required, use a device such as a power strip.
[a] Even when the input plug shape of the connected device is 2P, it can also be
connected to the UPS's "power output "outlet. However, [c] when the input plug
shape is 2P and a ground wire is attached, connect the ground wire of the plug to
the "grounding terminal.
[d] If the ground wire is not long enough to reach the "grounding terminal, use a
conversion plug with ground terminal.
・
To connect an AC adapter, connect it to a "power output" outlet around which
there is enough room for its connection.
※
Connection [a] or [b] is not possible for use as a UL standards and CE marking
compliant product.
3.
When using automatic shutdown software, connect the UPS and PC with a USB
cable packaged with the product or an optional cable for UPS service support
(model BUC26: UPS service (OS Standard) connection cable).
Refer to "5. Connected device automatic shutdown processing" (P.59) and "6.
Contact input and output function" (P.66).
Note: The above is required only when using automatic shutdown software and
contact signal inputs and outputs.
