57
12
SAMPLES
Playing Samples
The hot cue points and hot loops stored
on the
bank buttons 1 to 4 can be used as a sample up
to 5 seconds. Samples can be mixed to a
currently playing title or played on its own in
pause mode. In the basic setting, samples are
played repeatedly as a loop, however, they may
also be played only once.
1
Press the button SAMPLE, to switch on the
sampler function.
•
The button lights up red.
2
To play the desired sample, press the
corresponding bank button.
•
The bank button will be flashing purple.
3
The sample will now be played repeatedly as
a loop. For playing it only once, press the
button SAMPLE once again.
•
The button will be flashing red.
4
To turn off the sampler function or to stop the
playback at any time, press the button
SAMPLE again.
•
The LED of the button extinguishes.
Adjusting the Level and Speed
With the buttons TIME and RATIO the speed and
the level can be adjusted for each sample
individually.
1
While the sample is playing, activate the
setting mode for the speed with the button
TIME (LED lights).
2
Then adjust the speed with the jogdial
between ± 100 %.
• The display inserts SP= 0.0 % .
3
To set the level activate the setting mode
with the button RATIO and adjust the value
wit the jogdial between 0 and 255.
• The display inserts the value.
4
The parameter settings will only be active
temporarily. As soon as you release the
jogdial, the effect processor will automatically
return to the default value. Press the button
HOLD (LED lights) to save your parameter
settings.
