31
5.5.3 Network Setup
In this section, you can manually configure the IP address, subnet mask and gateway for
your camera unit. Change the settings accordingly if they cause IP address conflict with other
devices in your network.
To change the IP address settings:
1. Select on the IP field (IP Address, Subnet Mask or Gateway) that you wish to change.
2. Enter the preferred IP address.
3. Select [Save & Reboot]. Select [OK] on the dialog box to confirm.
4. The new settings will be registered after the reboot.
IP Address :
Subnet Mask :
Gateway :
255 . 255 . 0 . 0
10 . 10 . 100 . 1
Save & Reboot
10 . 10 . 100 . 225
Back
