12
1.
MFD cable - Connect one end of the ethernet cable to your MFD and the other to the
ethernet port on the Junction Box marked “Controller/MFD”.
2.
Joystick Controller cable - Connect one end of the ethernet cable to the controller and
the other to the ethernet port on the Junction Box marked “Controller/MFD”.
3.
Camera Harness – Connect mating end to connector found at the base of the camera
and the remaining end of the Camera Harness to the ethernet port in the Junction Box
marked “Camera”. To create a proper waterproof connection, ensure connection to the
camera base is properly secured and locked.
4.
AV Analog cable – If you are using an analog monitor, connect one end of the AV Analog
cable to the [AV] port in the Junction Box and the other end to an analog monitor.
5.
Power cable - Connect the power cable provided to the [Power] ports in the Junction Box
and the DC power source on your vessel. It is recommended that you use either a 12V
or 24V DC power. The power cable consists of one inner black and white wire. Please
ensure that the correct polarity is inserted into the right terminal.
Black for (-) negative, White for (+) positive
6.
NMEA 0183 socket - Your Ulysses Micro system may have functions that require input
from NMEA 0183 devices. To utilize those functions, connect your NMEA 0183 data source
to the [NMEA] socket in the Junction Box using 24-20 AWG cables. Connect the NMEA
data output from the NMEA device to the Rx pins in the Junction Box.
7.
Reset Button - Press the reset button for 10 sec to reset the Junction Box to it’s the
default IP. To re-connect the Junction Box to the system, you will need to set the camera‘s
IP back to the default IP. The equipment should be connected thereafter.
8.
LED Indicators - The LED indicators provide you with a visual indication of the functioning
of the equipment connected to the Junction Box. Please refer to the Troubleshooting
guide in Chapter 8 for explanations on the LED indicators.
1. MFD cable
2. Joystick Controller cable
3. Camera Harness
4. AV Analog cable
5. Power cable
Power
AV Analog Audio-Visual
Camera
Joystick Controller/MFD
NMEA 0183
Reset Button
LED Indicators
