39
CONTROLLER
ULS-OMS-CR-091905
Controller Serial No.
Back
Select this to connect to the Joystick Controller
Joystick Controller’s serial number
See the next page for section image.
Connecting additional Joystick Controller(s)
The system is designed to connect to additional Joystick Controller(s). To connect additional
Joystick Controller(s) to the camera system network, simply repeat the steps mentioned above.
Changing the Joystick Controller’s IP address
If the Joystick Controller’s IP address is causing conflict with other equipment in the network,
you can change the IP address manually. To change the IP address:
1. Select on the IP address field and enter the desired IP address
2. Select [Set] to apply the new IP address.
Adjusting the background lighting of the Joystick Controller
The camera is pre-installed with variable color LED lightings. Select your preferred color from
the seven colors preset.
For customization of the lighting’s color, select the last color icon and adjust the slider for [Red],
[Green] and [Blue] accordingly.
To change the brightness of the LED, simply shift the slider for [LED Brightness].
