53
6.3.2
Remote
Before starting to print, make sure that the printer's working area is clean and there
are no objects on it. Otherwise, the printer heads may be damaged.
To manage printouts via the Internet, a network connection is required. If you have not yet adapted
the printer for remote control, go back to chapter 0. Start the web interface, and then upload the
.gcode file using the UPLOAD-G-CODE FILE (S) button in the Files tab. After starting this procedure,
a file selection window will be displayed, select the appropriate file and then accept the selection.
The file will be transferred over the network and saved in the SD card memory.
To start the printout, open the Files menu marked in the drawing below and then select the file with
the left mouse button, after selecting the file, a message confirming the start of printing will appear.
Figure 41 Panel files
In the Files menu there is a list of all previously uploaded .gcode files, in this tab you can manage all
the files on the card. To print a model, select the corresponding file and then accept the printing
start procedure.