29
4.1
Dismantling the transport box
Before unpacking the printer, check the tilt / drop sensor installed on the narrow side wall of the
shipping crate. Noticed irregularities should be reported immediately (preferably when the printer is
delivered) to the forwarding agent, always before unpacking the transport box.
The Omni500 LITE printer is delivered in a special reusable transport box for safe transport. Follow
the instructions below to properly disassemble the Omni500 LITE printer.
For your safety, we recommend that you disassemble the box by at least two people
and in a room with sufficient free space. After disassembling the box, please keep it
for warranty purposes.
Figure 13 Printer in a shipping box
1. Set up the packed printer with a minimum of 2 meters of free space on each side.
2. Cut all fastening belts, first checking the condition of the crate from the outside.
3. Remove the sliding wall mounting screws (along the orange line in figure 3).
4. Remove the movable wall of the transport box.
5. Remove 6 bolts (figure 4) securing the remaining elements of the box to the transport pallet.
6. Using elastic handles, remove the transport crate from the side in the direction shown in figure 4.