background image

 

 

 

10 

 

 

Operating Instructions 

Electronic button 

 

There are five buttons: 

 (Low), 

 (Mid), 

 (High), 

 (Lamp), 

 (Power).See picture above. 

 

1.  After connecting to power, indicator light will lit on, all the output close and the hood will enter 

standby mode. The indicator light will be off automatically after reminding if no operation. 
 

2.  Power on: Press power button 

 once, its indicator light will lit on, the hood works at low speed. 

Indicator light of low speed 

 will be bright. Press power button again to close it, and its indicator 

light will be off. All the function operation of the hood will be closed, the hood enters into standby 
mode, and run by circle. The speed buttons and lamp button can work separately and not controlled 
by the power button. When a certain function button is pressed, the hood operates at that function 
status. Press (Power) button under any status, the cooker hood will be switched off without any 
functions. 
 

3.  Press lamp button 

 once; lights will be turn on. Indicator light of lamp button 

and power 

button

 will lit on. Press lamp button 

 again to turn off the lights. Indicator light of lamp button 

 and power button

 will be off. And recycle like this. 

 

4.  Press the

 (High) button once, motor runs on high speed, the indicator light of high button

 and 

power button 

will beam. Press high button

 again and the motor will stop. Indicator light of 

high button and power button will be off and run by circle. 
 

5.  Press the 

 (Mid) button once, motor runs on middle speed, the indicator light of middle button

 

and power button 

will beam. Press middle button

again and the motor will stop. Indicator light 

of middle button and power button will be off and run by circle. 
 

6.  Press the 

 (low) button once, motor runs on low speed, the indicator light of low button

 and 

power button 

will beam. Press low button

again and the motor will stop. Indicator light of low 

button and power button will be off and run by circle. 

 

7.  Low speed, mid speed and high speed cannot work at the same time. When hood is on high speed, 

press low speed, it will turn to low speed at once; when it is in low speed, press middle speed, it will 
turn to middle speed immediately, and so on. 
 

 

 

 

Summary of Contents for ORCG60MB
















Reviews: