Omega ORCG60MB, Instruction Manual

Page: 8 / 15

8
Installation Instructions
6. Equip the v-flap and expansion pipe to the outlet and fixed with a cable tie. See pic 3. Put the cooker
hood on the wall mounted screws. See pic 4.
Note: Expansion pipe or ducting kit need to be purchased separately.
7. Install the outside chimney bracket onto the outside chimney with 2 pcs of ST4*8mm screws, here
should be sure the inside chimney can be moved inside freely. See pic 6.
8. After adjusting the height, fix the body with 2 pcs of ST4*30mm safety screws. Note: The two safety
vents are positioned on the back housing, with a diameter of 6mm. Then put the two chimneys
together onto the cooker hood body, also lead the expansion pipe outside of the room. See pic 7.
9. Adjust the height of the inside chimney into the suitable height and fix the inside chimney to the
inside chimney bracket with 2 pcs of ST4*8mm screws. See pic 8.