![background image](http://html1.mh-extra.com/html/omega/omb-daq-54/omb-daq-54_user-manual_3939920085.webp)
System Requirements
For successful operation of
Personal DaqViewXL
with your Personal Daq system, your computer should
conform to the following
as a minimum
:
•
PC system with Pentium
®
processor
•
USB port
•
Microsoft Excel
, version 8
•
Microsoft Windows 98SE (Second Edition), Windows/Me/2000
or
/XP
•
16 Mbytes of RAM (32 Mbytes recommended)
•
Energy Save
modes disabled (see the Caution on page 1)
Installation
You will need to use an
Authorization Code
the first time you launch
Personal DaqViewXL
. The code is
provided when the application is purchased.
Note 1
: The following steps assume that
Personal DaqView
has already been installed.
Note 2
:
If you are replacing
Personal DaqViewXL
with a newer version, you should remove the older
version prior to installing the new application.
To install the Personal DaqViewXL application
:
1.
Run
Personal DaqView
.
2.
Select
Authorization
from the
File
pull-down menu. An Authorization dialog box will appear.
3.
Type in the code, as it appears on your Authorization Sheet.
4.
Click the <
Apply Code
> button.
First Time Use
Personal DaqViewXL
is an
Excel
“add-in” that must be loaded into the
Excel
environment before it can be
used. Perform the following steps to load
Personal DaqViewXL
into
Excel
:
1.
Start
Excel
(refer to Microsoft documentation as needed).
2.
Select the “Tools” menu and click on “
Add-Ins
.” This will open the “
Add-Ins
” dialog box, as
shown below.
Excel’s “Add-Ins” Dialog Box
2 491-0905,
rev
3.0
918596
Personal DaqViewXL User’s Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com