#10 Unlock #1 When Ignition Is Turned Off:
Default On
This feature configures the system to automatically unlock the vehicle’s doors
every time that the ignition switch is turned off. An exception to this would be if
feature #12 is turned on, and a door being open when the ignition switch is turned
off. If the system is installed without the Driver’s Door Priority unlock interface,
this feature unlocks all of the doors when the ignition switch is turned off. If
Driver’s Door Priority is installed, this feature controls the driver’s door only, and
the following feature will control the automatic unlocking of the other doors.
Programming Unlock #1 When Ignition Is Turned Off:
Follow Steps 1 to
4 on page 25; at Step 4 the Valet Switch will be pressed and released ten times. The
system’s response will be ten siren chirps, and the Status Light flashing ten times,
pausing, then repeating. Within 10 seconds, press and release the transmitter’s
"Arm/Lock" button to turn on “Unlock #1 When Ignition Turned Off” (the siren
will chirp once) or the "Disarm/Unlock" button to turn this feature off (the siren will
chirp twice).
Page 30
times, pausing, then repeating. Within 10 seconds, press and release the transmitter’s
"Arm/Lock" button to turn on “Doors Lock When Ignition Turned On” (the siren
will chirp once) or the "Disarm/Unlock" button to turn this feature off (the siren will
chirp twice).
#11 Unlock #2 When Ignition Is Turned Off:
Default On
Explained in the previous feature, this feature controls the automatic unlocking
of all doors except the driver’s door if Driver’s Door Priority is installed.
Programming Unlock #2 When Ignition Is Turned Off:
Follow Steps 1 to
4 on page 25; at Step 4 the Valet Switch will be pressed and released eleven times.
The system’s response will be eleven siren chirps, and the Status Light flashing
eleven times, pausing, then repeating. Within 10 seconds, press and release the
transmitter’s "Arm/Lock" button to turn on “Unlock #2 When Ignition Turned Off”
(the siren will chirp once) or the "Disarm/Unlock" button to turn this feature off (the
siren will chirp twice).
#12 Open Door Bypass Of Ignition Locking:
Default On
This feature cancels the automatic locking or unlocking of the vehicle’s doors
when the ignition switch is turned on or off if one of the doors is open. This feature
can be useful, for example, for leaving others within a locked vehicle when only the
driver exits the vehicle. Features #9, #10, or #11 must be turned on for this feature
to operate.
Programming Open Door Bypass Of Ignition Locking:
Follow Steps 1 to
4 on page 25; at Step 4 the Valet Switch will be pressed and released twelve times.
The system’s response will be twelve siren chirps, and the Status Light flashing
Page 15
Remote Sensor Bypass allows the option of “turning off” the sensor any- time the
system is armed using the transmitter. When the sensor is bypassed, only the
sensor zone is bypassed and all other protected zones will remain fully opera-
tional and vigilant. The sensor zone will reset to its normal operation the next time
the system arms.
Your Omega MAX-E system offers the ultimate in comfort and convenience-
remote engine starting. This feature allows the vehicle’s interior to be warmed in
the winter or cooled in the summer before you enter the vehicle. Simply leave the
climate controls set to the desired settings when leaving the vehicle prior to using
the remote starting feature.
The following pages explain the remote engine starting operations. If the
vehicle has a manual transmission, a special procedure is required when exiting the
vehicle to enable the ability to remote start. Otherwise, the actual activation of
remote start is the same for automatic or manual transmission vehicles.
REMOTE ENGINE STARTING
Prewarning Detection Circuit:
When the sensor’s prewarn zone is
violated the security system will respond by chirping the siren three times and
relocking all of the doors.* If the prewarn circuit is triggered five times while the
system is armed, the prewarning circuit will automatically shutdown until the
security system is disarmed and armed again.
* Must be connected.
REMOTE SENSOR BYPASS
To Activate Remote Sensor Bypass:
THE DOORS WILL LOCK
UPON ARMING
THE PARKING LIGHTS
WILL FLASH ONCE
TO CONFIRM
ARMING
1st
2nd
THE SIREN WILL CHIRP ONCE
TO CONFIRM ARMING
THE SIREN THEN CHIRPS ONCE
AGAIN TO CONFIRM SENSOR
BYPASS
Press & Release the “Arm/Lock” Button ( ) to Arm, then Press &
Release the “2nd Channel Output” Button ( II )
U
The remote engine starting feature should not be used when
the vehicle is parked in an enclosed structure or garage!
An optional doorlock interface must be installed
