Page 2
Page 43
press and release the button
The Echo will play a musical melody; this is the Start Melody which
plays upon remote starting. One of five melodies may be chosen now.
Each press of the button changes to the next melody, note that the
LCD screen displays “S” and a numeral, which is the melody number.
When the desired musical tone has been the last one played
The Echo will play another musical melody; this is the Stop Melody
which plays when remote start engine run period ends. There are
five different melody choices which can be made.
Each press of the button changes to the next melody, note that the
LCD screen displays a numeral only, which is the melody number.
When the desired musical tone has been the last one played, you may
The Time’s “Minutes” will flash, and may be set now.
When the minutes are correct
• While the Echo programming must be “scrolled” through, programming mode
can be exited at any point within the menu by simply not pressing any but-
tons for 12 seconds. The Echo chirps once when it exits programming mode.
• If the “MUTE” vibrating operation is selected, turning off the chirps, the
remote starting melodies are also replaced by vibration.
• The previous also applies to the musical melodies when programming- if the
P
leave the Echo undisturbed for 12 seconds, until it chirps once
OR
press and release the button to scroll
back through the programmable features.
Press and release the button
..
press and release the button
P
Press and release the button
..
When the Hours are correct (please note “AM” or “PM”)
P
press and release the button
P
Press and release the button
to advance the minutes or
..
press and release the button
to reverse the minutes.
...
