Omega MAX-E Operation Manual Download

Page: 15 / 24

Page 32

#16 Lights On Upon Disarm:

Default On

This feature configures the system to illuminate the vehicle’s parking and

interior lights for 30 seconds after they flash twice when it is Disarmed. Otherwise,
if this feature is turned off, the parking lights will only flash twice upon Disarming
the system.

Programming Parking Light Illumination Upon Disarm:

Follow Steps 1 to

4 on page 25; at Step 4 the Valet Switch will be pressed and released sixteen times.
The system’s response will be seven sixteen chirps, and the Status Light flashing
sixteen times, pausing, then repeating. Within 10 seconds, press and release the
transmitter’s "Arm/Lock" button to have the lights also turn on for 30 seconds when
the system is Disarmed (the siren will chirp once) or the "Disarm/Unlock" button
to have the lights only flash twice when the system is Disarmed (the siren will chirp
twice).

#17 Disarm Alarm Upon Trunk Release:

Default On

This feature configures the Trunk Release (2nd channel output ) to automati-

cally Disarm the system at the same time that it is used.

Programming Auxiliary Channel #2 Disarms System:

Follow Steps 1 to

4 on page 25; at Step 4 the Valet Switch will be pressed and released seventeen
times. The system’s response will be seventeen siren chirps, and the Status Light
flashing seventeen times, pausing, then repeating. Within 10 seconds, press and
release the transmitter’s "Arm/Lock" button to have the system Disarm when the
2nd channel output is used (the siren will chirp once) or the "Disarm/Unlock" button
to have 2nd channel not Disarm the system when it is used (the siren will chirp
twice).

#18 Doorlock Pulse Time:

Default .8 Second

This feature, for the installer’s use, offers the selection of a .8 second or a 3

second pulse duration of the system’s doorlock outputs. Certain vehicles have
power doorlocking systems which are vacuum operated, and thus require a longer
output pulse from the Omega MAX-E system. While use of this feature is
determined by the type of vehicle the system is installed in, this feature does save
the owners of such vehicles the added expense of a special adapter.

Programming Door Lock/Unlock Pulse Duration:

Follow Steps 1 to 4 on

page 25; at Step 4 the Valet Switch will be pressed and released eighteen times. The
system’s response will be eighteen siren chirps, and the Status Light flashing
eighteen times, pausing, then repeating. Within 10 seconds, press and release the
transmitter’s "Arm/Lock" button to configure the doorlock pulse for .8 second (the
siren will chirp once) or the "Disarm/Unlock" button to configure the doorlock
pulse for 3 seconds (the siren will chirp twice).

Page 13

OTHER TRANSMITTER OPERATIONS

The previous sections have described the basic everyday operations of your

Omega MAX-E system. The transmitter is also capable of operating several other
optional functions which are explained in this section.

Two auxiliary outputs are available for use (the primary output Arms and

Disarms the system). The 2nd Channel output is also capable of Disarming the
system; thus it is ideally suited for remote trunk release. Operating the 2nd Chan-
nel Output will also unlock the doors when it Disarms the system, should it be
armed. If desired, the unlocking of the doors and disarming of the system may be
programmed to not operate. The final output, the 3rd Channel Output, cannot
affect the armed or disarmed status of the system, nor unlock the doors as part of
its operation.

To Activate 3rd Channel Output:

Press & Hold for 3 Seconds both Button ( II ) and Button ( III )

Hold 3
seconds

CAN OPERATE OTHER
OPTIONAL EQUIPMENT,

ON OR OFF THE

VEHICLE

CAN OPERATE OPTIONAL

WINDOW ROLL-UPS

EXAMPLES:

NOTE: The 3rd Channel Output can be
programmed to operate from Button “

III

”