background image

Page : 7

D
C
B
A

5.- GENERAL SPECIFICATIONS

DISPLAY

TYPE . . . . . . . . . . . . . . . . . . . . . . . . . 4 digits, 7 segments, red or

green LED.

HEIGHT DIGIT . . . . . . . . . . . . . . . . . .  57 mm. (2.3") or 100 mm. (4").
RANGE . . . . . . . . . . . . . . . . . . . . . . .  -9999 a 9999
POLARITY . . . . . . . . . . . . . . . . . . . . .  Minus only (-).
OVERRANGE . . . . . . . . . . . . . . . . . .  Display flashing.
DECIMAL POINT . . . . . . . . . . . . . . . .  Models M1& M3.

ANALOG-TO-DIGITAL CONVERSION

INPUT CONFIGURATION . . . . . . . .  Single ended.
TECHNIQUE . . . . . . . . . . . . . . . . . . . . Dual slope, average value.
POLARITY . . . . . . . . . . . . . . . . . . . . .  Automatic, only minus sign.
SIGNAL INTEGRATION PERIOD . . . .  100 ms.
READ RATE . . . . . . . . . . . . . . . . . . .  2.5/s.

OSCILLATOR . . . . . . . . . . . . . . . . . .  400 KHz. quartz crystal.

ENVIRONMENTAL

OPERATING TEMPERATURE .  .  0  to  +50 ºC (32 to 122 ºF).
STORAGE TEMPERATURE . . . .  -20 to +85 º C (-4 to 185 ºF).
RELATIVE HUMIDITY . . . . . . . .  0 to 85 % not condensed.
PROTECTION . . . . . . . . . . . . . . .  IP65. (Front part only).

MECHANICAL

DIMENSIONS . . . . . . . . . . . . . . .  See table in page 11.
PANEL CUT OUT . . . . . . . . . . . .  See table in page 11.
DEPTH . . . . . . . . . . . . . . . . . . . .  See table in page 11.
WEIGHT . . . . . . . . . . . . . . . . . . .  See table in page 11.
CASE MATERIAL . . . . . . . . . . .  Aluminium extruded.
FINISHED . . . . . . . . . . . . . . . . . .  Anodized, black colour.

ELECTRICAL

STANDARD POWER SUPPLY .  115 Vac. ±10% 50 / 60 Hz.

(Optionally 230 Vac)

POWER CONSUMPTION . . . . . .  See table in page 11.

6.- FRONT VIEW, for both series

Decimal point.
Model M1 & M3

Polarity
indicator

7.- REAR VIEW, for both series

Attaching screws

Signal input

connector

Power Supply

Vac + Earth, fuse and
spare fuse.

Summary of Contents for LDP-144 Series















Reviews: