9 |
P a g e
5
Setting / Changing Passwords
Layer N Smart Probe data can be password protected through SYNC. Password protecting your smart probe prevents data
in the Smart Probe from being extracted without authorization. If your Smart Probe is password protected, the password
must be stored in the IF-006 so it can transmit data to the Layer N Cloud. To assign a password to your Layer N Smart Probe,
follow these instructions:
Step 1:
Navigate to the
Device Settings
tab in the SYNC interface and click
Set Passwords
under the
Sensor
Settings
section.
Step 2:
Create a Configuration Password. Upon saving your password, you will be prompted to update the
Interface Password as well to ensure your data is transmitted to the Layer N Cloud.
Important:
If the interface password does not match the configuration password, data from your Smart Probe will
not be sent to the Cloud and the LED Status Indicator on the IF-006 will flash Red and Green indicating
there is an error.
