Omega FTB380 Series, User Manual

Page: 3 / 16

General Information ....................................1
Product Description ....................................2
Installation ...................................................2
Connections .................................................3
Operation .....................................................4
Calibration ...................................................5
Maintenance ................................................6
Troubleshooting ..........................................8
Specifications ..............................................9
Parts & Accessories ................................... 11
Warranty/Disclaimer .................................13
Return Requests/Inquiries .........................13
TABLE OF CONTENTS
GENERAL INFORMATION
This manual will assist you in installing and
maintaining your FTB380 Series turbine meter
and associated display electronics. The turbine
meters can be purchased with or without the
display electronics. (See Figure 1)
When purchased with the display electronics,
optional accessory modules are available for
field installation. Information on these acces-
sories is contained in separate manuals. Cali-
bration details using the display electronics
are given in this manual.
When purchased without the display (Suffix -
ND) an optional field installable Pulse Output
Module (FLSC790-P-ND) is available and
described in a separate manual.
1
Figure 1
Turbine Housing
Display Electronics
For best results, take the time to fully ac-
quaint yourself with all information about all
components of your FTB380 Series Turbine
Meter System prior to installation and use. If
you need assistance, contact the Omega Flow
Application Department.
This symbol is used throughout the
manual to call your attention to safety
messages.
Warnings alert you
to the potential for
personal injury.
Cautions call your
attention to prac-
tices or procedures
which may damage
your equipment.
Notes give information that can improve ef-
ficiency of operations.
It is your responsibility to make sure that all
operators have access to adequate instruc-
tions about safe operating and maintenance
procedures.
Read Me!
For your safety, review the major warnings
and cautions below before operating your
equipment.
WARNING
CAUTION
The apparatus enclosure may contain
aluminum and is considered to constitute
a potential risk of ignition by impact or
friction. Care must be taken into account
during installation and use to prevent
impact or friction.
WARNING
Part of the enclosure is constructed from
plastic. To prevent the risk of electrostatic
sparking the plastic surface should only be
cleaned with a damp cloth.
WARNING
1. This equipment is approved to handle only
fluids which are compatible with all wetted
materials.
2. When measuring flammable liquids, ob-
serve precautions against fire or explosion.