Omega Excalibur AL-1920-EDP, Operation Manual

Page: 24 / 28

24
Installer Programmable Features (cont’d)
Feature #2 - Light Relay Functions
Dome Light Output (press “ arm/lock ” button to program) - DEFAULT
Door Lock (press “ disarm/unlock ” button to program)
Ignition Output (press “ trunk ” button to program)
Accessory Output
(press “
start
” button to program)
The system has two built-in relays, which can be programmed to perform several
different functions� The primary function of this relay, is to operate the vehicle’s dome,
or interior lighting as part of the system’s operations� Optionally, if desired or needed,
this relay can be programmed to be a door lock relay, or as medium-capacity ignition
or accessory outputs (10A max), if needed for remote starting use�
Feature #5 - Stick Shift Remote Starting
Off (press “ disarm/unlock ” button to program) - DEFAULT
On (press “ arm/lock ” button to program)
This feature changes the parameters of the system’s remote start operation to be suit-
able for manual transmission-equipped vehicles via a “setup” procedure which must
be followed upon exiting the vehicle to ensure the transmission is in neutral�
Feature #4 - Turbo Timer
Off (press “ arm/lock ” button to program) - DEFAULT
Run 1 minute (press “ disarm/unlock ” button to program)
Run 2 minutes (press “ II ” button to program)
Run 3 minutes (press “ III ” button to program)
This feature, the operation of which is described on page 9, when turned on
configures the system to automatically keep the engine running briefly after it is
turned off. This operation is designed specifically for vehicles having turbocharged
engines (the user may temporarily bypass the feature if desired)� This feature
should only be programmed by the installer , and the operation of this feature
depends on the correct connection of the safety wire to the vehicle’s parking brake�
Feature #3 - Horn Relay Functions
Horn Output (press “ arm/lock ” button to program) - DEFAULT
Door Unlock (press “ disarm/unlock ” button to program)
Ignition Output (press “ trunk ” button to program)
Accessory Output (press “ start ” button to program)
This is the second of two built-in relays which can be programmed to perform several
different functions� The primary function of this second relay, is that it is available to
operate the vehicle’s existing horn; either in conjunction with the electronic siren, or in
place of the siren� Using both the siren and the horn creates an extremely effective
security system� Optionally, if desired or needed, this relay can be programmed to be
a door unlock relay, or as additional medium-capacity ignition or accessory outputs
(10A max), if needed for remote starting use�
Feature #6 - Engine Detection method
Tachless Hi (press “ lock ” button to program) - DEFAULT
Tachless Lo (press “ unlock ” button to program)
Tach Wire (press “ trunk ” button to program)
Data Tach (press “ start ” button to program)
Crank Only (press “ lock ” & “ unlock ” to program)