26
Installer Programmable Features (cont’d)
Feature #10 - Gasoline Or Diesel Engine
Gasoline
(press “
arm/lock
” button to program)
- DEFAULT
Diesel
(press “
disarm/unlock
” button to program)
This feature changes the system’s timing of the ignition and starter output sequence
for remotely starting vehicles with gas or diesel engines� When set for gasoline, the
starter output will occur 3 seconds after the ignitions turn on� Also, when the system
is in “Tachless” mode, the engine running status will be determined 10 seconds
after cranking� When set for diesel, the starter output will occur 20 seconds after the
ignitions turn on to allow for glow plug warming� Also, when the system is running
in “Tachless” mode, the engine running status will be determined 40 seconds after
cranking� This allows the vehicle battery(s) to recharge properly and show normal
voltage levels due to the heavy drain diesel engines have on the electrical system
during cranking�
This feature should only be programmed by the installer
�
This device complies with FCC Rules part 15� Operation is subject to
the following two conditions, (1) This device may not cause harmful
interference and, (2) This device must accept any interference that
may be received, including interference that may cause undesired
operation�
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifi
-
cations could void the user’s authority to operate the equipment�
