background image

6

Controller & Transmitter Functions (cont’d)

TRUnK RELEASE / CHAnnEL 2: 

 Press and hold the “TRUNK” 

icon for 3 seconds�

THE SYSTEM WILL DISARM AND THE TRUNK WILL 

• 

OPEN�

UPON RECEIVINg CONFIRMATION FROM YOUR 

• 

SYSTEM, THE CONTROLLER WILL PLAY THE TRUNK 

RELEASE ANIMATION AND VOICE ALERT 

 

(1-way transmitter: press anD holD the trunk 

button for 3 seConDs)

REmOTE START: 

 Press and release the “    ” icon twice within 5 

seconds� (see user feature #21 for additional options)

THE PARKINg LIgHTS WILL FLASH ONCE AND THE 

• 

STATUS LIgHT WILL FLASH RAPID gREEN� 

THE SYSTEM WILL TURN ON THE IgNITIONS AND 

• 

PROCEED TO START THE ENgINE� 

ONCE THE ENgINE IS RUNNINg, THE PARKINg 

• 

LIgHTS WILL TURN ON AND STAY ON AND THE STATUS 

LIgHTS WILL FLASH SLOW gREEN�

UPON RECEIVINg CONFIRMATION FROM YOUR 

• 

SYSTEM, THE CONTROLLER WILL PLAY THE REMOTE 

START ANIMATION AND VOICE ALERT�

THE CLOCK WILL CHANgE TO 0:00 TO START THE 

• 

REMOTE START TIMER� IT WILL TIME HOW LONg THE 

ENgINE RUNS IN MINUTES & HOURS� 

(

1-way transmitter: press the start button 

twiCe in 5 seConDs)

*

If the engine stalls, the system will make up to 3 more attempts�

• 

Each time you park your vehicle, set the climate controls to give you the de-

• 

sired interior temperature when you use the remote start�

The engine will run for the preset run time (see user feature #1)� 

Run Time Extender

• 

: Press the “    ” icon one time while in remote start mode 

to restart the engine run timer� The timer on the controller will restart at “0:00”� 

nOTE: This can only be used once per remote start cycle. The controller will also give you 
“run time expiration” warning (2 chirps) 1 minute before the remote start cycle ends.

If you decide not to drive your vehicle, you can turn off the remote start using 

• 

the same method to turn it on (Default = press “start” twice in 5 seconds)  

nOTE: If user feature #21 is programmed for 1 press, the 1st press = Run Time Extender so 

an additional press is required.

Upon entering the vehicle during remote start mode, turn the ignition key to 

• 

the “ON/RUN” position (

nOT START!!

)� When you press the brake pedal, the 

remote start will turn off allowing the ignition key to take over�

*

x2

Summary of Contents for Excalibur AL-1920-EDP





























Reviews: