4
Configuring The Meter
30
4.4.3 Displaying the Filtered/Unfiltered Input Signal
To display the filtered/unfiltered signal input, follow these steps:
1.
Press the
MENU
button until
RD.CF
displays, then press the
∂
TARE
button three
times.
or
Press the
∂
TARE
button from
R.2
.
One of the following displays:
•
R.3=F
(Filtered value)
(Default)
•
R.3=U
(Unfiltered value)
2.
Press the
ß
MAX
button to toggle between available choices.
3.
Press the
MENU
button to store your selections.
STRD
momentarily displays,
followed by
COLR
menu.
4.5 Selecting a Display Color
COLR
Refer to Table 6-1 for a summary list of menu configuration.
Selecting “Display Color” is not active unless your meter is a Version “B”.
To select a display color, follow these steps:
1.
Press the
MENU
button until the meter shows
COLR
.
2.
Press the
∂
TARE
button. The meter shows one of the following:
•
GRN
•
RED
•
AMBR
3.
Press the
ß
MAX
button to scroll between available choices.
4.
Press the
MENU
button to store your choice. The meter momentarily shows
STRD
, followed by the next menu
S1.CF
(Setpoint 1 Configuration). Or you can
press the
RESET
button to abort and go back to the
RD.CF
menu.
Note
☞
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
