i
Table of Contents
PREFACE
Manual Objectives
This manual shows you how to set up and use the Programmable Digital Meter.
Standard Procedures:
*
Checking voltage jumpers, or changing voltage power
*
Mounting the panel
*
Selecting the input type
*
Selecting a decimal point position
*
Scaling with known loads (on-line calibration)
*
Scaling without known loads
*
Enabling/disabling the front-panel tare
*
Displaying the filtered/unfiltered input signal
*
Selecting a display color
*
Setting the setpoint's active band
*
Selecting a latched or unlatched operation
*
Setting setpoint deadbands
*
Enabling/disabling setpoint changes
*
Enabling/disabling the RESET button in the Run Mode
Optional Procedures:
*
Setting input resolution
*
Enabling/disabling analog output
*
Selecting analog output as current or voltage
*
Selecting analog output or proportional control
*
Selecting proportional band
*
Using manual reset (offsetting setpoint errors)
*
Scaling analog output
For first-time users: Refer to the QuickStart Manual for basic operation and set-
up instructions.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
