4
Configuring The Meter
42
42
4.13 USING OUTPUT SCALE AND OFFSET
OT.S.O
(Continued)
11.
Press the
∂
TARE
button. The meter shows last previously stored 4-digit number
(-1999 through 9999) displays with flashing 4th digit.
12.
Press the
ß
MAX
button to change the value of the flashing digit. If you continue
to press the
ß
MAX
button, the flashing digit's value continues to change.
13.
Press the
∂
TARE
button to scroll to the next digit.
14.
Press the
MENU
button to store your selection. The meter shows
OUT.2
(Output 2).
This analog signal should correspond to your Read 2 display.
15.
Press the
∂
TARE
button. The meter shows selected output.
If you select
O.2=V
for voltage, the maximum signal you may select is 10.00
for an 0-10 Vdc signal output. If you select
O.2=C
for current, the maximum
signal you may select is 20.00 for a 0-20 or 4-20 mA DC signal output.
16.
Press the
ß
MAX
button to change the value of the flashing digit. If you continue to
press the
ß
MAX
button, the flashing digit's value continues to change.
17.
Press the
∂
TARE
button to scroll to the next digit.
18.
Press the
MENU
button to store your selection. The meter momentarily shows
STRD
, followed by
LK.CF
(Lockout Configuration).
WARNING:
If the meter displays all flashing values on any item, the value
has overflowed. Press the
ß
MAX
button to start new values.
Note
☞
Note
☞
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
